Unitrol AT-26, Инструкция пользователя

Страница: 10 / 21

10
PROBLEMS CAUSES REMEDIES
- If you have problems while thegear
box head is going up and down.
- If you have problems during the
locking head movements.
- If you have problems during the
movements of tyre changer table.
- The pressure valve may be blocked.
( Figure 1 / Valve 1 )
- The pressure valve may be blocked.
( Figure 1 / Valve2 )
- The pressure valve may be blocked.
( Figure 1 / Valve 3 )
- Open the valve cover and by using pim
of max

5 mm diameter unblock the
valve.( Figure 1 )
- The engine is working but the locking
head is not turning.
- The engine belt may be untightened.
- Check the engine belt.
- There is not enough pressure in the
hydraulic unit
- The direction of the hydraulic unit may be
reverse.
- There may be lack of oil in the hydraulic unit. - Change the cables vice in the
connection.
- Put oil till the level of the insdicator.
- The locking head is not working.
- The o-rings of the locking valve may be
damaged.
- The enter o-ring may be damaged. - Change the o-rings.
- Call our technical service.
- The locking head is not turnig to the
right or left
- The gear box body is not moving up
and down.
- Tyre carriying table is not moving. - There may be a problem with the electrical
connections.
- Call our technical service.
Figure : 1
1
– Gearbox Up Down Valve
2
– The Locking Head Valve
3
– Changer Table Valve
WARNING !!
Do not press on the cable of the remote
control system may fall,
cable ıs protected by spıral and sprıng
ıncase of droppıng and smashıng parts
WARNING!
Do not step on the cable of the remote
control system. C
able ıs protected by
spıral and sprıng ıncase of droppıng
and smashıng parts.
Before operating the machine,
lubricate the area shown in the
figure.