Unitrol AT-26, Инструкция пользователя

Страница: 8 / 21

8
Fig. 15
TUBELESS AND SUPERSINGLE TYRES
Fig. 16
Fig. 17
DEMOUNTING
- Break the bead at the front part of the tyre and
pushing on the bread, lubricate the rim flange and
the bread with suitable grease ( Fig. 16 ). Repeat
the operation on the back.
-
If it is a balcony rim ( that is, inclined from 10” to
15” ) continue the bread – breaking operation until
the tyre has come completely out of the rim.
- This operation is easier with the use of the special
tubeless roller ( Fig. 17 ) which is supplied on
reguest.
N.B. The for the demounting of the particularly
hard textile supersingle tyres or tubeless tyres with
a very high rim flange refer to the instructions for
the demounting of agricultural wheels.
N.B. The bead and the rim flange should be well
lubricated.
MOUNTING
- For mounting undemanding tubeless tyres, place
the tyre on the trolley keeping it tilted. Then insert
and lower the rim, pressing on the tyre to allow the
top of the rim to enter the tyre.
- If it is not possible use the special pincers
supplied ( Fig. 18 ) and mount the two beads at the
same time. To mount the second bead proceed as
shown in.
N.B. For mounting particularly hard tubeless and
supersingle tyres, treat them as agricultural
wheels.
Warnings!
It is absolutely forbidden to inflate tyres with
the whell still on the machine.
The movement of particularly heavy whells
requires at least two people.