GO1 User Manual
2021 Unitree All Rights Reserved
36
How to turn off the robot when the remote control module fails
When the remote control module fails (such as the power of the joystick exhausted), the robot can not
be used to make the robot dog down until it is flat on the ground. You can only use the battery power
button to force the shutdown (note! If you are not ready before the shutdown, it will easily cause the
robot to power down and shoot the ground, causing serious damage to the robot).
Preparations before forced shutdown: After passing the nylon belt through the robot suspension
board, hold the nylon belt by hand to make it in a tight state (as shown in the figure below). Press the
power switch for a short time, and then press and hold the power switch for 2 seconds Turn off the
power, and slowly place the robot on the ground after power off.
Illustration of preparations before forced shutdown
