Unitor UPC 85 ML, Инструкция по эксплуатации

Страница: 9 / 24

09
FRONT PANEL DESCRIPTION
1
Air presence LED
2 Reset Protection alarm LED
3 Air Test button
4 Excess temperature LED
5 Welding enabled LED
6 Machine Live LED
7 Cutting current regulation
8 Cutting current display
9 RESET button
10 ON-OFF switch
For the number reference below, refer to the Front Panel Description:
1.Turn the switch on the back panel to ON position.
2.The green led
(5) will light up (Unit live).
3.The green led (1) will light up to indicate the presence of compressed air in the air circuit.
Plasma Cutter Setup:
Return clamp must be clamped as close as possible to the work piece or cutting table.
If earth return clamp is not connected or having poor connection, upon torch trigger, the plasma pilot arc will
go off and machine display showing 18 A. It is not possible to use the plasma cutter until the proper
connection is setup up.