Unitor UPC 85 ML, Инструкция по эксплуатации

Страница: 3 / 24

03
CONTENTS
1.Safety instructions
2.Technical data
3.Installation
4.Operating instructions
5.Torch parts
6.Maintenance
7.Trouble shooting
8.Cutting/thickness characteristics
9.Wiring diagram
10.Parts list
DELIVERY
UPC-85 ML Air Plasma Cutter 404185 delivery consist of:
1 Machine supply complete with 3,5m primary cable 3+G x 4mm
2
2 Torch with 6m cable (connected directly to the machine)
3 Return clamp with 6m cable with Dix25
4 Initial supply consumables kit of 2 x Electrode, 2 x Tip Cutting, 1 x Cartridge, 1 x Shield Cup
5 Air regulator with filter and water separator mounted on the machine
6 User instruction manual
Remarks:
Air hose is not supplied.
Minimum diameter of the air hose should be 9mm – 3/8”.
In case you use an extension cord, be sure that it is of an appropriate wire gauge for the cord length and
system voltage.
Primary Voltage Cord size Length
230 V 1P 6mm 2 (10 AWG) Up to 40 m (131feet)
400 V 3P 6mm² (10 AWG) Up to 200 m (656 feet)
440 V 3P 6mm² (10 AWG) Up to 200 m (656 feet)