10
6. OPERATION
6.1 Power On
1. Before power on, please check the local area video system (NTSC/ PAL). The
VIDEO SYSTEM is situated on the right side panel; this setup will affect the video
system input and output.
2. The power switch is situated on the right side of the device (switch “ON” to
power-on and “OFF” to power-off).
NOTE
: Each time after power-on, the system auto-detects its peripherals. When the status LED
flashes indicates that the CF card is proceeding testing (complete boot time is 2 seconds)
When an image file error has been detected, the CF card will suggest the user to initiate
repair using the computer or use the Repair/ Format function supported by the device
【
CF
Card Management
:
Repair/ Format function.
】
3. The user may use AV/ RF switch to select the video input system.
4. Live mode is the pre-set mode after power-on. When it is currently under schedule
recording, system auto enters recording mode.
Do not withdraw the CF card while booting. It may destroy the data stored
within the CF card.
When no images are displayed on the LCD monitor, please check the video
source (line in or RF1~RF4) and NTSC/ PAL switch.
6.2 Live Mode
1. Live mode is the default setup after system start-up. User may view live images,
setup the receiving channel of the camera and adjust the sound volume.
(1) Two types of video input source (RF/ AV):
Switch to “RF” for connecting to
RF camera and “AV” to line input camera.
AV IN
The device supports one line input camera.
RF1 ~ RF4
The device supports portable wireless (RF) camera (maximum
connection of 4 RF cameras). Press
《 》
or
《 》
button to switch
between cameras (RF1 ~ RF4).
(2) Sound volume:
The user may press
《
》
or
《 》
button to adjust the volume of the
build-in speaker.
(3) Monitoring Display:
Press
《
DISPLAY
》
button to switch ON/ OFF LCD display
mode or OSD info.