22
7.
Why are video images constantly changing color?
A: It is because according to CCD camera different illuminant reflects different degrees of
color rolling; please prevent the camera directly irradiating the light source.
8.
How can the wireless IR camera be started?
A: IR function is auto started during the night time (low illumination). IR LED lit indicates
that the IR function has been activated.
9.
Why are video images black and white, when the IR function is activated?
A: It is because under low lux video images turn from color to black and white images.
C.
CF Card
1.
Why can’t the device read the CF card?
A: a. The CF card is damaged.
b. The CF card system format is incompatible to the device. Please format to FAT16 file
system.
2.
May one use the CF card from the digital camera?
A: Yes, only if it is FAT16 format.
3.
Are there any limitations on CF card brand?
A: No, any standard brand may be used.
D.
Record
1.
Why are the video images distorted?
A: Make sure that the video source is setup properly (i.e., main device is setup to PAL and
camera to NTSC).
2.
Why is the recording quality poor?
A: Please adjust your recording parameter; adjust your quality to high.
3.
Why is the device unable to record?
A: a. Check the input system.
b. Check whether the CF card have been inserted (to view the monitoring status, please
refer to the bottom right corner, CF card status info).
c.
【
7.5 CF Card Management
】
When the recording method is not setup as continuous
recording, it stops recording when the storage capacity is full.
d. Unable to perform schedule recording, please refer to
【
6.3 Record Mode – Stop Record
】
.
c. Please contact your local dealer, when following through the above steps, but still
unable to resolve the problem.
