Unitek Classic Q3 400 Series, Руководство пользователя

Страница: 26 / 32

Q3 1000-2000A
26
C
o
m
m
is
si
o
ni
ng
Commissioning Q3 x/x-x with REG4
Check the following connections before commissioning
Observe the type plate!
Basic connection - power connections Q3
Power supply power bolts X10:14, X10:15, X10:16
Power supply auxiliary voltage terminals X5:17, X5:18
Motor connection A1/A2 bolts X10:10, X10:13
Protecting earth PE
earthing screws PE on the housing
Control connections
Enable contact between X1:3 and X1:4
Command value signal X1:6, GND X1:8a
Actual value signal X1:9, GND X1:8b
Shields X1:8
Control electronics REG4
Switch S4 PI amplification position 4
Switch S5 I-term position 4
Switch S8 D amplification position 8
Switch S9 actual value position 8
Potentiometer I
1
peak current 10%
Potentiometer I
2
peak current 10%
Potentiometer I
D
continuous current 100%
Potentiometer X
P
amplification 50%
Potentiometer INT integrato left full scale
Potentiometer n
max
speed left full scale
Potentiometer offset offset 50%