Unitek BAMOCAR D3, Руководство пользователя

Страница: 9 / 52

Basic information
BAMOCAR D3 8
Safe
ty
re
gu
lat
io
ns
2.8 Safety regulations
In principle electronic equipment is not fault proof!
Caution - High voltage
DC 800V=
Shock hazard! / Danger to life!
Discharge time of the bus circuit >4min.
Before installation or commissioning begins, this manual must be thoroughly read and
understood by the skilled technical staff involved. It must be ensured that the documentation
(manuals) and thus, the knowledge of the unit and especially the safety advices must be available
for all persons who are concerned with the unit
If any uncertainty arises or if any function is not or not sufficiently described in the
documentation, the manufacturer or dealer should be contacted.
Any incorrect installation/connection may damage the device!
Any incorrect programming may cause dangerous movements!
Intended applications:
The devices of the BAMOBIL-D3 are power electric parts used for regulating energy flow.
They are designed as components to control EC synchronous motors, ac asynchronous motors in
vehicles, machines, or installations.
For applications in residential areas additional EMC measures are necessary.
Any other type of application must be approved by the manufacturer.
The user must draw up a hazard analysis for his end product.
Protection rating IP65
Connection only to batteries
Operation only allowed when the device is closed!
The control and power connections can be charged with high
voltage without an active operation!
The minimum discharge time of the bus circuits is at least 4
minutes!
Measure the voltage before any disassembly!