Basic information
BAMOCAR-D3-700-100/160
Version: 2019 / V05
8
Saf
et
y r
eg
ula
tio
ns
2.8
Safety regulations
In principle electronic equipment is not fault proof!
Caution - High voltage
DC 800 V=
Shock hazard! / Danger to life!
Discharge time of the bus circuit > 4 min.
Before installation or commissioning begins, this manual must be thoroughly read and
understood by the skilled technical staff involved. It must be ensured that the documentation
(manuals) and thus, the knowledge of the unit and especially the safety advices must be available
for all persons who are concerned with the unit
If any uncertainty arises or if any function is not or not sufficiently described in the
documentation, the manufacturer or dealer should be contacted.
Any incorrect installation/connection may damage the device!
Any incorrect programming may cause dangerous movements!
Intended applications:
The devices of the
BAMOCAR-D3-700-100/160
are power electric parts used for regulating energy
flow.
They are designed as components to control EC synchronous motors, ac asynchronous motors in
vehicles, machines, or installations.
For applications in residential areas additional EMC measures are necessary.
Any other type of application must be approved by the manufacturer.
The user must draw up a hazard analysis for his end product.
Protection rating IP65
Connection only to batteries
!
Operation only allowed when the device is closed!
Control and power connections can carry dangerous voltages
even if the drive is inoperative!
The minimum discharge time of the bus circuits is superior to
4 minutes!
Measure the voltage before any disassembly!
