Control connections
BAMOCAR-D3-700-100/160
Version: 2019 / V05
40
Res
ol
ver
co
nne
ct
io
n
5.9
Resolver connection
Only with BAMOCAR-D3-RS
The resolver is an absolute measuring system
for a motor revolution.
It is robust and not impaired by high motor
temperatures.
Its build corresponds to a revolving
transformer.
The rotor is supplied by the reference (10 kHz).
The stator supplies the sine and cosine signals
modulated by the rotational frequency. The
amplitudes of these signals are analyzed and
digitalized in the servo-drive. The resolution is
automatically set to an optimum of 10, 12, or
14 bit.
The max. possible speed is 50 000 rpm (10 bit).
The digitalized signals are used for the polar
wheel angle, the position and speed control,
and the incremental output.
Only use motors with a 2-, 4-, 6-, or 8-pole resolver which have been approved by the
manufacturer.
Connector
X7
14-pin Tyco type connector
Connecting cable
4 x 2 cores, twisted in pairs and shielded, additional overall shield.
For link chains use appropriate cables!
Min. cross-section 0.25 mm
Cable length
for >25 m only use high-quality resolver cables with adequate
shielding properties.
Shield connection
across connector X7
combine all shields and connect
them to the housing
across the motor connector
connect the overall shield to the
connector housing
Setting parameters
see software Manual NDrive
