INTRODUCTION
Thank you for purchasing our Oil-Filled Radiator. Each unit has been
manufactured to ensure safety and reliability. Before first use, please
read the instructions carefully and keep them for further reference.
ASSEMBLY
Remove the heater and all the accessories from the carton.
1. Turn the heater upside down.
2. Position the wheel base assemblies between the end fins.
3. Attach them to the heater using the U-bolts and wing nuts supplied.
4. Tighten the wing nuts.
5. Turn the heater the right way up.
PARTS DESCRIPTION
1. Power switch
2. Thermostat knob
3.Handle
4. Oil filled fins
5. Castors
6. Cord storage
7. Timer
8. Power cord
9. Fan Operation
OPERATING YOUR OIL-FILLED RADIATOR
Place the heater on the floor at least 90 cm away from the wall and any
other objects such as furniture, curtains or plants.
(Make sure the power supply used corresponds to the one on the rating
label)
With the thermostat control switch and the power setting switches in the
'0' position, plug the heater into the main power supply.
