11
6. Using Your Alarm (non-digital version, 5CO)
Tes0ng
Each week your alarm should be tested by pressing the test bu2on. The alarm will beep once
followed by 4 loud pulses, then a brief pause and then 4 more pulses, ending with a single
beep.
During this test sequence, the red LED will flash for 10 seconds.
This confirms that the alarm is powered up and working.
Re-se2ng the Alarm
If the alarm sounds, the test / reset bu2on will silence the alarm unless it is s1ll detec1ng dan-
gerous levels of CO. The green light will then flash every 30 seconds to indicate that the alarm
has power.
2532-7202-10_5CO_ASH:_ 2018.10.26 5:43 PM Page 11
