background image

Safety

5

AVERTISSEMENT:

 NE PAS UTILISER UNE CUVE DE RELAXATION 

IMMÉDIATEMENT APRÈS UN EXERCICE FATIGANT

11. 

Warning:

 Prolonged immersion in a spa or hot tub may be injurious 

to your health

 

AVERTISSEMENT:

 L’UTILISATION PROLONGÉE D’UNE CUVE DE 

RELAXATION PEUT ÊTRE DANGEREUSE POUR LA SANTÉ

12. 

Warning:

 Do not permit electric appliances (such as a light, telephone, 

radio, or television) within 5 feet (1.5 m) of this spa or hot tub

 

AVERTISSEMENT:

 NE PAS PLACER D’APPAREIL ÉLECTRIQUE 

(LUMINAIRE, TÉLÉPHONE, RADIO,  TÉLÉVISEUR, ETC) À MOINS 
DE 1.5M (5 FEET) DE CETTE CUVE DE RELAXATION

13. 

Caution:

 Maintain water chemistry in accordance with manufacturer’s 

instruction

 

ATTENTION:

 LA TENEUR DE L’EAU EN MATIÈRES DISSOUTES 

DOIT ÊTRE CONFORME AUX DIRECTIVES DU FABRICANT

14.  Hyperthermia occurs when the internal temperature of the body 

reaches a level several degrees above the normal body temperature 
of 98.6°F (37°C). The symptoms of hyperthermia include drowsiness, 
lethargy, and an increase in the internal temperature of the body.

Effects: 

1- Unawareness of impending hazard.

 

2- Fetal damage in pregnant women.

 

3- Failure to recognize the need to exit spa.

 

4- Physical inability to exit spa.

 

5- Unconsciousness and danger of drowning.

 

6- Failure to perceive heat.

15. 

Warning:

 The use of alcohol or drugs can greatly increase the risk of 

fatal hyperthermia in hot tubs and spas

 

AVERTISSEMENT:

 LA CONSOMMATION D’ALCOOL OU DE 

DROGUE AUGMENTE CONSIDÉRABLEMENT LES RISQUES 
D’HYPERTHERMIE MORTELLE DANS UNE CUVE DE RELAXATION

Содержание T7

























Отзывы: