background image

User Confi gerable Settings

16

Changing Filtration Cycle Settings

The 

fi

 ltration settings can be changed by following the instructions on 

entering and changing settings in the T7’s user settings menu found earlier 
in this section. What follows is a description of what the 

fi

 ltration related 

settings are and  the options you can select for each of those settings:

Filtration 

C

ycles Per Day [

 or 

]:

The number of 

fi

 ltration cycles per day. You can select between 1 cycle a 

day, or two cycles per day.

Hours Of 

F

iltration Per Day [

 

or 

]:

The total number of hours the control should 

fi

 lter per day. If the T7  set to 

the default of 2 cycles per day, any even  number of hours 0 through 12 
may be selected. If the T7 is set for 1 cycle a day, 0 through 24 hours of 

fi

 ltration may be selected.

Next Filtration Cycle 

S

tart Time [

 -

 or 

 - 

]:

The number of hours until the next 

fi

 ltration cycle starts. If the T7  set to the 

default of 2 cycles per day, 0 through 12 may be selected. If the T7 is set 
for 1 cycle a day, 0 through 24 hours may be selected.

Changing the Temperature Display Setting

The T7 topside can display the temperature in either Fahrenheit or Celsius. 
The default setting is Fahrenheit, which can be toggled to Celsius.

Changing the Buzzer Setting

By default the T7 topside will sound an internal buzzer when a button 
press is registered. Simply toggle this code off to disable the buzzer.

A video walking through con

fi

 guring the T7’s user con

fi

 gurable  settings 

can be found on YouTube at the following URL:

http://youtu.be/7BLzlTHmEOQ

Содержание T7

























Отзывы: