spotter
Tm
features:
• quickly and easily links with Voltek NS via wireless infred signal
• 500’+ transmission range
• approximately 40+ hours continuous run time between charges
• back-lit display
• IP67 water, dust, and shock resistant
• “warning” button allows operator to sound the siren for emergency situations”
• “shutdown” button allows operator to shut down equipment in emergency
situations (only if Voltek NS is integrated with the E-stop system on equipment)
The Spotter remote control allows the operator to monitor and control a Voltek
NS in real-time. Status indicators, meters, and button presses are synchronized
between both devises. The Spotter features the same user interface as the Voltek
NS.
The Spotter is ideal for situations where the NS is mounted in a vehicle or on
equipment yet control is needed remotely (i.e. concrete pump trucks).
System Overview and operation:
sensitivity level meter
sensitivity adjustment
reset button
press and hold to restart
equipment or reset hydraulics
(only if E-stop/hydraulic
functions are installed)
battery meter
shutdown button
press to shutdown equipment
in an emergency situation
(works only if Voltek NS is
integrated with E-stop or
hydraulics)
infra-red link
sender/receiver
warning button
press to briefly use the Voltek NS
siren to notify others of potentially
hazardous situations
power button
warning indicator
shutdown indicator
E-field sensitivity meter
link button
press to link with a Voltek NS
Voltek NS User Guide
Page 9
