■
6
│
GB│IE
UAV 300 A1
Assembly
WARNING! – RISK OF INJURY!
►
Do not connect the appliance to a power socket during assembly.
►
The cutting blades in the cutter attachment
6
of the appliance are very
sharp. Take extreme care when assembling the appliance.
♦
Place the small waste collector
0
in the large waste collector
w
. To do this,
push the small waste collector
0
down along the guide rails in the large
waste collector bin
w
until it is fully engaged (see fig. 1).
Fig. 1
Fig. 2
♦
Hold the cutter attachment
6
by the two integrated carrying recesses
8
and position it over the large waste collector
w
so that the power cable
1
points backwards and the viewing window
q
in the large waste collector
w
points forwards (see fig. 2).
NOTE
►
The cutter attachment
6
must sit upright and firmly on the large waste collec-
tor
w
. Otherwise, the appliance will not start!
►
The appliance cannot be used until the cutting attachment
6
is correctly
seated on the large waste collector
w
and the safety switch
7
deactivated.
First use
NOTE
►
Make sure the
REV/OFF/AUTO/FWD
switch
3
is in the
OFF
position
before plugging the appliance into the power socket.
►
Every shredder is tested for functionality after manufacture. It is possible
that you may find paper residue in the cutting blades.
♦
Insert the plug
1
into a mains power socket.
Содержание 385039 2107
Страница 3: ...power overheat...
Страница 49: ...46 FR BE UAV 300 A1...
Страница 177: ...174 SI UAV 300 A1...