5. Tag-operation
The “Tag-operation” provides you all the necessary options to operate a tag, as shown in Fig.
62. In which, the Log section under the bottom is the operation log that shows the status of
every operation. And, this section clears itself every time you access Tag-operation.
As the previous description in section 4.4, both Inventory and Menu can access
Tag-operation. The difference is the preset value of the Antenna-ID option and the EPC
option, and the behavior of Back.
Fig. 62. The “Tag-operation” of Indy-embeddedapp
5.1. Access
The “Access” is a part of Tag-operation, and it has thirteen options to configure the operation
and then access the tag, as shown in the red dot line boxes in Fig. 63, as described in Table
10.
39
