16
3.1.3. Channel
For any kind of reason, you might sometimes want to fix on a particular channel instead of
letting the module circularly switching around the available channels. This Channel option
allows you to configure the specific channel you want to fix on, as shown in Fig. 20. In which
the available channels are restricted by the regulatory region, as shown in the angle
brackets and Table 5.
Fig. 20. Configuring Channel
3.1.4. LBT
The option of LBT allows you to enable or disable the LBT feature from its sub-options. This
option would restrict to “On” for JP4 and JP6 region according to the regulation showing in
Table 5.
Fig. 21. Configuring LBT
3.1.5. Enable-antennas
The four Enable-Ant options allow you to switch the status of the four antennas by pressing
the Enter key on it, respectively. These options will feedback you the current condition of
antennas with [O] for “Enable” and [X] for “Disable,” as shown in Fig. 22.
Fig. 22. Configuring Enable-Ant-3
