manualshive.com logo in svg

Unitech RP901, Руководство пользователя, Страница: 67 / 84

Поделиться
Скачать
Unitech RP901 Скачать руководство пользователя страница 67

   

RP901 User Manual 

3.7 Memory Communication Interface 

Options 

 

When the Memory Communication Interface is chosen, each scanned data is 

marked with date and time, and then stored in the internal memory. When the 

memory is full with data, Tag reading will elicit a warning signal in the form of 3 

short beeps and a one second lighting of the red LED indicator, and no reading 

will actually occur. Only when the data inside the memory has been received 

and deleted by the Host PC may the Scan Operation resume. Choosing 

Memory as the Communication Interface enables the Field Separator. 

 

3.7.1 Field Separator 

Set the symbol used to separate each field of data formatting. 

 

Configuration Method: 

Directly input the symbol, maximum 1 Byte in 

size then click 

  to transfer the 

parameter value to the RP901. 

 

Default Setting: Comma (,) 

 

52

© 2016 unitech Electronics Co., Ltd. All rights reserved.   
unitech is a registered trademark of unitech Electronics Co.,Ltd

 

Содержание RP901





















































































Отзывы:

Нет отзывов