RP901 User Manual
3.1.2.2 Sessions and Target
Session and Target can be set for determining how often a tag will respond to a
query from the reader and allowing for multiple readers to conduct
independent inventories.
￭
Session
There are four Sessions,S0,S1,S2 and S3 can be selected.
Configuration Method:
Select one of the sessions, then click
to send the new parameter to the RP901.
Default Setting: S0
￭
Target
There are two Targets: Single Target and Dual Target. RP901 will read flag
A if Single Target is selected, and will read A first then read B if Dual Target
is selected.
Configuration Method:
Select one of the Targets, then click
to send the new parameter to the RP901.
Default Setting: Single Target
29
© 2016 unitech Electronics Co., Ltd. All rights reserved.
unitech is a registered trademark of unitech Electronics Co.,Ltd