31
Copyright 2009 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
2. Under
Main
tab, select the profile you want to
activate.
3. A pop-up window appears “A Power Cycle is
required to make settings activate properly.”
Tap
OK
, and then tap
OK
to exit the Summit
Client Utility.
4. Tap
Start
→
Programs
→
Utilities
→
Boot-
Mode
. Tap
Warm Boot
to warm start the ter-
minal and load the previous settings.
5. The Summit icon on the taskbar indicating the
AP is connected.
Double tap this icon to bring up Summit Con-
trol Utility. Tap
Disable Radio
, you can discon-
nect the AP.
Under
Status
tab, you can see the IP address,
signal strength and quality.
