Chapter 1
Getting Started
10
2. Connect the USB charging cable to the USB port on a PC/ Notebook and plug
the AC adapter cable into the power jack of the USB charging cable (2).
3. Plug the AC adapter cord into an electrical outlet (3).
Turning the terminal on for the first time
After you have initially charged your device for about 16 hours, the terminal is ready to
be used. You can now start up your device where you will calibrate the display, learn
some basic stylus usage, and set up the system time zone, date and time.
Powering On
1. Turn on your device by pressing the power button on the front panel.
NOTE:
The PA968 screen ships with a protective plastic film. You may remove it
by peeling from the corner. The screen will be more susceptible to
scratching without the film, but will be more readable.
2. The Welcome screen appears for a moment followed by the WINCE screen.
Calibrating the screen
The calibrate screen automatically appears when the terminal is powered on for the
first time or after the system is reset.
To calibrate the screen at any time, follow these
instructions.
1. Tap
Start
→
Settings
, and then switch to
Con-
trol Panel
tab.
2. Tap the
Stylus
icon.
The Stylus Properties window appears.
1
2
3
