Chapter 3
Getting Connected
27
Copyright 2009 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
3. A pop-up window appears “A Power Cycle is
required to make settings activate properly.”
Tap
OK
, and then tap
OK
to exit the Summit
Client Utility.
4. Tap
Start
→
Programs
→
Utilities
→
Boot-
Mode
. Tap
Warm Boot
to warm start the ter-
minal and load the previous settings.
5. The RF setting window pops up once the RF
signal is detected.
Tap
Add New
or double tap a preferred net-
work.
6. Enter the Network name (SSID).
Uncheck
The key is provided automatically
.
Enter the network key. Tap
OK
.
