Chapter 1
Getting Started
9
Copyright 2009 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
3. Slide the terminal into the cradle until it clicks into place.
4. The connection is secure when the bottom edge of the terminal is aligned with
the cradle, and the LED indicator on the terminal lights up red.
Checking the LED status
Checking the Battery Status
If the battery level becomes low in the course of normal use, a status icon appears on
the device screen indicating low or very low battery status. In both cases, perform an
Activesync operation to back up your data, then recharge your device as soon as
possible.
CAUTION!
Once the device is shut down, you should recharge the device within
48 hours. Otherwise you will lose all data including files stored in the
RAM memory.
Connecting the terminal to a host (PC/ Notebook)
Use the USB charging cable to connect the PA968 to a PC/ Notebook in order to use
with Activesync.
NOTE:
To avoid low battery situation while synchronizing, you should connect
the power supply.
1. Press and hold the release button on both sides of the USB charging cable and
connect it to PA968 (1).
LED
Light
Description
Terminal
GPRS/GPS
Communication
Flashing Red
GPRS/GPS power is on
Flashing Green
Communicating
Engine reading
Solid Red
Reading
Solid Green
Decoded
Power charging
Solid Red
Charging
Solid Green
Fully charged
Cradle
Power charging
Solid Green
Power is on
Communication
Flashing Green
Data synchronization is active
Terminal LED indicators
from left to right:
- GPRS/GPS Communication
- Engine reading
- Power charging
Cradle LED indicator
