Unitech Electronics Co., Ltd.
Modified
by Ling
PA968 Operation
Manual
V1.0
Page 48 of 117
2. Define inter character and shift key delay. Barcode will read and output in
the speed defined.
3. Under Version tab, view the decoder version and USI version.
2.8 Scan2Key
Scan2Key application can route input from scanner port to keypad buffer, so
that all input from scanner or magnetic reader will be treated as they are just
input from keypad. With this router, scan data can be directly input into non-
scanner port aware application.
1. Double tap the “Scan2Key” icon on the task bar. Tap “Scan2Key” in the
pop-up selection menu to show the general information of Scan2Key settings
and the software version. The scanner is enabled by default.
Note:
To enable Scan2Key, press “FUNC” key and “7” key to bring up Scanner
Control Panel. Under “To Kpd” tab, check “Start Scan2Key When Exit”. Tap OK.
The Scan2Key icon is available on the task bar.
