Unitech Electronics Co., Ltd.
Modified
by Ling
PA968 Operation
Manual
V1.0
Page 32 of 117
7. Double tap “Aimer mode” to select the aimer mode as required.
Select “Interlaced”, the aimer and illumination LEDs are not allowed to be on at
the same time.
Select “Off”
if you don’t want to use the aimer mode.
8. Double tap “Aimer delay”. Drag to define delay time for the operator to aim
the imager before the picture is taken. During the delay time, the aiming light
will appear, but the LEDs won’t turn on until the delay time is over.
