71
© 2019 unitech Electronics Co., Ltd. All rights reserved.
unitech is a registered trademark of unitech Electronics Co.,Ltd
All product and company names are trademarks, service marks, or registered trademarks of their respective owners
MS925HC User’s Manual
MSI Code Set ID
UK Plessey Set ID
Matrix 2 of 5 Set ID
Interleaved 2 of 5 Set ID
Industrial 2 of 5 Set ID
Full ASCII Code39 Set ID
GS1 Databar (RSS-14)
Limited Set ID
GS1 Databar (RSS-14)
Expanded Set ID
GS1 Databar (RSS-14) Set ID
China Post Code[TOSHIBA Code] Set ID
Code 32 Set ID
Steps:
1. Scan the SET ID bar code for a particular symbology.
2. Scan one or two alphanumeric characters from the Full ASCII Table.
3. Scan the SET ID bar code again.
Reset / Abort
1. The scanner will beep three times as indication that a setting is not yet complete or
unexpected barcode is scanned during multi-step configuration
2. If you make a mistake, forget a step, etc., and want to abort the multi- step
configuration, scan RESET/ABORT and start over again.
Reset / Abort
