64
© 2019 unitech Electronics Co., Ltd. All rights reserved.
unitech is a registered trademark of unitech Electronics Co.,Ltd
All product and company names are trademarks, service marks, or registered trademarks of their respective owners
MS925HC User’s Manual
4.5.3 TRIGGER CONTROL
(FLASH, CONTINUOUS & TEST MODE)
4.5.4 IDENTICAL READ INTERVAL(FLASH,
CONTINUOUS & CONTINUOUS AUTO OFF
MODE)
TRIGGER CONTROL DISABLE *
TRIGGER CONTROL ENABLE
Notes:
When enabled, LED can be switched on/off by pressing trigger
IDENTICAL READ INTERVAL(DEFAULT = 1.0 SEC)
Note:
1. The interval will start counting only after the scanned barcode
is removed from the aimer of scanner. If you want to read the
same barcode continuously without any timeout, please use
Test Mode.
Steps:
1.Scan IDENTICAL READ TIMEOUT
2. Scan 3 digits (000~255) from Full ASCII Code39 numeric table (Group 46)
(001=0.1 Sec, 002=0.2 Sec, 003=0.3 Sec, 004=0.4 Sec, 005=0.5 Sec
006=1.0 Sec, 007=1.5 Sec, 008=2.0 Sec, 009=2.5 Sec, 010=3.0
Sec...254=124.5 Sec, 255=125 Sec, Default = 006 (1.0 Sec))
3. Scan IDENTICAL READ TIMEOUT
