16
© 2019 unitech Electronics Co., Ltd. All rights reserved.
unitech is a registered trademark of unitech Electronics Co.,Ltd
All product and company names are trademarks, service marks, or registered trademarks of their respective owners
MS925HC User’s Manual
2.6 Power Off Timeout
2.6.1 Variable Timeout
The timeout is 3 minutes and 0 second by default, and is programmable
from minimum of 10 seconds (00:10) to maximum of 60minutes and 60
seconds (60:60)
For example, to set the timeout as 5 minutes 30 seconds:
1. Scan [Set Minute]
2. Scan [0] & [5] on below numeric barcode table.
3. Scan [Set Minute]
4. Scan [Set Second]
5. Scan [3] & [0] on below numeric barcode table.
6. Scan [Set Second]
Set Minute
(Default: 03 MIN)
Set Second
(Range: 00 SEC)
Disable Time out
(Scanner always On)
