Unitech MS920 Скачать руководство пользователя

Страница: 130 / 153

6. Operating Settings

- Settings that affect the way your product operates (trigger settings, flashing

mode, data decoding security settings, beep characteristics, etc.).

Pre-defined trigger modes

- These are pre-defined trigger settings used to quickly set up your scanner.

- If you are using a pre-defined mode, do not set the other Scanning/triggering

settings.

One pull and release turns the aimer, illumination and decoding on. If no

decode, second pull and release turns the aimer, illumination and decoding off.

Pre-defined trigger modes - Toggle

<CCMD>405100

One pull turns on the aimer, illumination and decoding. If not decode, aimer,

illumination and decoding turn off when the trigger is released.

Pre-defined trigger modes - Level

<CCMD>405101

One pull turns on the aimer only. When the trigger is released, illumination and

decoding turn on. If no decode, second pull and release turn the aimer,

illumination and decoding off.

Pre-defined trigger modes - Aim

<CCMD>405102

Содержание MS920


























































































































































Результаты поиска

Содержание MS920

Отзывы:

Похожие инструкции для MS920

Бренды по названию

Популярные бренды

Unitech MS920, Руководство пользователя

Результаты поиска

Содержание MS920

Отзывы:

Похожие инструкции для MS920

Бренды по названию

Популярные бренды