Unitech MS840B, Руководство пользователя

Страница: 34 / 63

* Scan “B7” to end
* Scan “Exit” to exit setup
There is only total 24 characters space available for defining these
one of the labels has been defined for the output with 24 characters three labels. If
, the other two
labels cannot be defined further.
Quick Setup
Appendix A has a quick setup chart, which gives you one-label-for-one-function
up the scanner, locate the label with the convenience to set up the scanner. To set
function you want and scan that label.
Batch Setup
If you need to configure more than one scanner, you may duplicate the settings of
can do this by producing a set of custom
anner, and by scanning these labels
other scanners.
ump Settings” label. Before you scan the label,
bology,
to
t he the
the scanner (master) to the others. You
erived from the master sc setup labels d
configuring the
The following label is called “D
please open a text editor application (such as Notepad, Word, etc.). Scan the
following label and the settings of the scanner will dump to the screen as one or
several ASCII string(s). Use a barcode printing software, select Code 39 sym
and use the string(s) to generate barcode labels. You use this batch setup labels
duplicate setting o t
o r scanners.
Dump
3.
F1>”.
”.
PC/AT, you have the following strings:
J8
Settings
If you have settings as follows:
* Device Type is “Keybaordless Wedge”.
digit of UPC-A and EAN-1 * Do not send the check
amble as “< * Define Pre
* Define Postamble as “<Tab>
* Define Label 0 as “START”.
When dumping settings on a
... I800C06D51D
08080A0O7C005354
415254.
Print into Code 39 bar code labels:
. . . I 8 0 0 C0 6 D5 1 DJ 8
0 8 0 8 0 A0 O7 C0 0 5 3 5 4
415254.
22