Unitech MS840B, Руководство пользователя

Страница: 17 / 63

Note:
1. If you remove the wedge and flip it upside down, it acts as a clip to hold up the scanner
when the base is mounted to the wall.
2. The cradle f
the antenna;
on the guida
3. When using
(default).
The USB cable can sup
Before changing the swit
Operation in USB COM requires additional driver which is available
http://www.ute.com
oot serves for table mount when being fixed to the upper portion adjacent to
the cradle foot serves for wall mount when being fixed to the lower portion
nce grooves.
RS232 or PS2 cable, the interface switch should be to the left side
port HID (default) or COM port when switch is set to right.
ch;
Disconnect power from cradle,
Disconnect USB cable from cradle
Set the interface switch
Connect USB Cable to cradle
Connect power to cradle
Interface switch, right
USB COM
Interface switch, left
RS232
PS2
USB HID
at
.
In case the USB cable is been used, the cradle will receive power via USB cable. In
order to charge the scanner it is mandatory to connect power supply to cradle
4. wer cord and the
unication cable (U /R
The guidance groove is designed for
comm arrangement of the po
S232/PS2). SB
5