P n e u m a t i c
Me t a l C i rc ul a r S a w
5 1 1 1 5 0 0 1 0 - 0 0 2 0
Translation of the original manual,
compiled: 24.02.11
511150010_20_BA_en_Version_00
Page 8 of 18
Use
Intended Use
Skilled personnel only is allowed to operate the machine.
The pneumatic metal circular saw is designed for an operation pressure of 6 bar.
This machine is a metal circular saw for dry cutting of steel, non-ferrous metal, plastic and
composite material. The saw only works with carbide tipped saw blades, which have to be original
Tanitec blades.
Improper Use
Any use deviating from the intended use as described is considered to be improper use
.
Working without personal protection equipment.
Additional instructions for application
Do not use abrasive wheels with this machine. Use only original Tanitec saw blades.
Tighten blade retaining bolt and all clamps before operating.
Secure work piece properly. Work piece should be straight and firmly clamped to avoid possible
movement and pinching as the cut nears completion.
Allow the blade to come to a complete stop before removing or securing work piece, or changing
work piece angle.
Check the inside surfaces of the arbour flanges as well as the sides of the blade for freedom from
any foreign matter.
Check the blade for cracks or other damage before operation. Replace cracked or damaged blade
immediately.
Never start the tool with the work piece against the blade.
Allow the motor to achieve full speed before cutting.
After turning tool “on”, gently push the tool forward to engage work piece, then slowly increase
pressure as required to produce the least amount of “sparking”.
Important:
After completing the cut, shut valve and wait for coasting blade to stop completely before putting
the saw down.
Never operate the tool in an area with flammable solid, liquids, or gases. Sparks or hot fragments
could cause a fire or explosion.
This machine is not applicable for cutting wood, masonry, magnesium or other pyrophorous
material.
Do not use cutting fluids or lubricants on the blade.
CS Unitec, Inc.
s(ARBOR
Avenue
.OR
w
ALK#4s4OLL
F
REE
:
s s
F
AX
:
s
www.csunitec.com
