P n e u m a t i c
Me t a l C i rc ul a r S a w
5 1 1 1 5 0 0 1 0 - 0 0 2 0
Translation of the original manual,
compiled: 24.02.11
511150010_20_BA_en_Version_00
Page 9 of 18
Some metals have coatings, which can be toxic. Take extra care to prevent inhalation and skin
contact when working with these materials. Request, and follow, any safety information available
from your material supplier:
These are certain applications for which this tool was designed. The manufacturer strongly
recommends that this tool not be modified and/ or used for any application other than for which it
was designed. If you have any questions relative to its application do not use the tool until you
have written the manufacturer and have been advised.
Metal chips are often very sharp and hot. Never touch them with bare hands. Clean up with
amagnetic chip collector and a chip hook or other appropriate tool.
Danger Zones
Operational
condition
----------------
Life phase
Normal function
Malfunction
Improper use
Expected use
Transport
Transport of the
machine in an
inoperable
condition
Dropping the
machine
Transport of the
machine in an
operable
condition
unknown
Start-up
Operation
Operating the
machine with
designated
device
unknown
unknown
Working without
device
Operation
Machine only
works with
actuated valve
Machine runs
without actuated
valve
Valve is blocked
in actuated
condition
unknown
Machine moves
the tool
Tool blocks
unknown
unknown
Maintenance
Operation at a
maintenance unit
Breakdown of the
machine
unknown
unknown
CS Unitec, Inc.
s(ARBOR
Avenue
.OR
w
ALK#4s4OLL
F
REE
:
s s
F
AX
:
s
www.csunitec.com
