Unitary products group RP007 Series, Инструкция по установке и эксплуатации

Страница: 5 / 16

036-21521-001-A-0103
Unitary Products Group 5
NOTE:
1. Performance calculated in accordance with ARI/ISO Standard 13256-1 for Water Loop application.
2. Cooling capacities are rated at entering air conditions of 80.6°F db / 66.2° F wb, 86° F entering water tempera-
ture.
3. Heating capacities are rated at entering air conditions of 68° F db / 59° F wb, 68° F entering water temperature.
TABLE 1: GENERAL DATA
Model Series 007 009 012 018 024 030 036 048 060
Nominal Cooling(Ton) 0.5 0.75 1.0 1.5 2.0 2.5 3.0 4.0 5.0
Cooling Performance
Cooling Capacity (BTUH) 7000 9000 12800 18100 24200 30800 36100 48200 59000
EER 12.4 13.0 12.6 14.4 14.4 13.5 14.2 14.0 12.6
Heating Capacity (BTUH) 8800 10700 14800 20900 27500 35200 41400 56000 72000
COP 4.2 4.4 4.2 4.5 4.6 4.4 4.6 4.6 4.4
Design CFM 200 300 400 600 800 1000 1200 1600 2000
Nominal Water flow (gpm) 1.5 2.25 3.0 4.5 6.0 7.5 9.0 12.0 15.0
Compressor-Type Rotary Rotary Rotary Rotary Recip. Recip. Recip. Recip. Recip.
Number Used 1 1 1 1 1 1 1 1 1
Air Coil-Type Enhanced Copper Tubes, Enhanced Aluminum Fins
Face Area (sq ft) 1.00 1.00 1.00 1.51 2.56 2.56 2.88 4.38 5.00
Rows/FPI 2/14 2/14 3/14 3/14 3/14 3/14 3/14 3/14 3/14
Water Coil-Type Co-axial
Water Connection Size 1/2" FPT 1/2" FPT 1/2" FPT 3/4" FPT 3/4" FPT 3/4" FPT 3/4" FPT 3/4" FPT 1"FPT
Drain Connection Size 3/4" FPT
Direct Drive Fan-Type Centrifugal, Forward Curved
Number Used 1 1 1 1 1 1 1 1 1
Diameter x Width (in) 9x4 9x4 9x4 9x6 9x7 9x7 9x7 10x9 10x9
Motor HP/Speed 0.10/3 0.10/3 0.17/3 0.25/3 0.25/3 0.33/3 0.50/3 0.75/3 1.0/3
Filters
HWP - Quantity-Size (in)
1-14x16x1 1-14x16x1 1-14x16x1 1-16x20x1 1-18x25x1 1-18x25x1 1-20x25x1 2-20x20x1
1-20x20x1
1-20x25x1
VWP - Quantity-Size (in)
1-14x16x1 1-14x16x1 1-14x16x1 1-16x20x1 1-18x25x1 1-18x25x1 1-20x25x1
1-16x25x1
1-14x25x1 1-18x25x1
1-16x25x1
Weight
Operating 130 135 155 180 215 235 260 325 345
Shipping 145 150 170 195 230 255 280 345 365
TABLE 2: OPERATING LIMITS - WATER LOOP
APPLICATION
COOLING HEATING
Min. Entering Water 50°F
40°F
1
1.
Heating operation below 55°F requires insulated water circuit.
Max. Entering Water 110°F 80°F
Normal Entering Water 60-90°F 50-70°F