TO REPLASE BATTERY
Open battery case cover on the back of scale:
1.
Take out the used battery with the aid of a sharp object, as shown in picture.
2.
Install new battery by putting one side of the battery beneath the contact and then pressing down the other
side.
3.
Take out the used batteries with the aid of a sharp object if needed.
4.
Install new batteries by putting one side of the battery down first and pressing down the other side.
5.
Please observe the polarity.
LCD
UNIT CONVERT WEIGHT UNIT
At the bottom of scale, you can find a unit conversion button as shown in picture. If the scale is with both
unit systems of Metric (g, ml) or Imperial (lb:oz, fl’oz), press MODE button to choose working mode
(weight, milk volume , water volume), then press unit conversion button to convert between two systems.
Take the conversion of weight unit for example:
•
When setting g as weight unit, the default volume unit is ml;
•
When setting lb:oz as weight unit, the default volume unit is fl’oz.
TO START WEIGHING
1.
Weighing mode
Place the scale on a solid and flat surface.
Place bowl (if used) on the scale before turning on the scale.
Press “M/Z” to enter weighing mode.
Wait until LCD shows all information.
Load weighing object on to start weighing, LCD will show the weight reading.
If the weighing object is water or milk, press M/Z button to choose volume mode and view the volume of
weighing object.
2.
Volume indication mode
Place the scale on a solid and flat surface.
Press “M/Z” to turn on the scale.
Wait until LCD shows “0”, and press MODE button to choose “Water” or “Milk” mode.
Put a liquid container onto the scale platform.
Press M/Z button to reset LCD to “0”.
Pour liquid (water or milk) into the container, LCD shows the volume of the liquid.
Press M/Z button to choose “Weight” mode and view the weight of liquid.
