While in the search mode, the remote search icon
will be constantly displayed.
Note:
The power adapter is intended to be correctly oriented in a vertical or floor mounted position. The prongs
are not designed to hold the plug in place if it is plugged into a ceiling, under-the-table or cabinet outlet.
Figure 4
Note:
If the power adapter is plugged in,
AC ON
will display in the time area for three seconds when powered
up. Conversely, if the power adapter is not plugged in,
AC OFF
will be displayed.
2.3.3
Sensor
Operation
Verification
The following steps verify proper operation of the sensors prior to installing the sensor array.
1. Verify proper operation of the indoor and outdoor temperature. Verify the indoor and outdoor temperature match
closely with the console and sensor array in the same location
(about 3m apart). The sensors should be within 2°C (4°F) (the accuracy is
±
1°C/2°F). Allow about 30 minutes for
both sensors to stabilize.
2.
Verify proper operation of the indoor and outdoor humidity. Verify the indoor and outdoor humidity match closely with
the console and sensor array in the same location (about 3m apart). The sensors should be within 10% (the accuracy is
±
5%). Allow about 30 minutes for both sensors to stabilize
3.
Weather
Station
Installation
3.1
Best
Practices
for
Wireless
Communication
Wireless communication is susceptible to interference, distance, walls and metal barriers. We recommend the following
best practices for trouble free wireless communication.
1.
Electro-Magnetic Interference (EMI)
. Keep the console several feet away from computer monitors and TVs.
2.
Radio Frequency Interference (RFI).
If you have other 433 MHz devices and communication is intermittent, try
turning off these other devices for troubleshooting purposes. You may need to relocate the transmitters or receivers to avoid
intermittent communication.
3.
Line of Sight Rating.
This device is rated at 100 m line of sight (no interference, barriers or walls) but typically you will
