6
Alarm
Mode
The FT0851 includes two time alarm features
6.1
Alarm
Operation
When an alarm condition is exceeded, the alarm icon will flash
(visual) and the alarm beeper will sound (audible).
To silence the beeper, press any key.
6.2
Viewing
the
alarm1
and
alarm2
Note:
While in the Normal mode, press the
ALARM
key to view the current and turn ON/OFF the alarm in
sequence: AL1 ON
→
AL2 ON
→
AL1 and AL2 ON
→
AL1 and AL2 OFF
Time of day are supported.
Next, press the
ALARM
key to view the alarm 1 with the alarm time ,Press again alarm key to view the alarm 1with
the alarm time.
Press the
ALARM
button again to view the alarm 2 with the alarm time ,Press again alarm key to view the alarm 2
with the alarm time .
Press the SNOOZE/LIGHT key at any time to return to the normal mode
。
6.3
Setting
the
Alarms
of
time
In normal mode, Press and hold the
ALARM
key
for three seconds to enter the alarm1 settings mode. The alarm
parameter will begin flashing.
In alarm mode, press the
SET
key to the alarm2 settings mode. To adjust the alarm parameter, press the [+] or [-] key to
increase or decrease the alarm setting slowly, or press and hold the [+] or [-] key for three seconds to increase or decrease
the alarm setting rapidly.
Press the
ALARM
key to turn on (the alarm icon will appear
) and off the alarm.
To save the alarm setting and proceed to the next alarm parameter, press (do not hold) the
SET
key.
Press the
SNOOZE/LIGHT
key once at any time to return to the normal mode. After 30 seconds of inactivity, the alarm
mode will time out and return to normal mode.
6.4
Restore
Factory
Default
To restore the console to factory default(WiFi netword ,Weather server and display), press the
MIN/MAX/-
key while installing the batteries at the same time. Wait 3 seconds after installing the
batteries to let go of the
MIN/MAX /-
key.
