background image

Requirements

 

 

The UEC 6000 and the UEC 7000 units are for indoor use only. Keep the UEC 6000 and the  
UEC 7000 dry and avoid areas of high humidity. 

 

The UEC 7000 requires a higher current power supply (Unisys Direct P/N # 75-0497-901).  
The UEC 6000 can use its supplied power supply or the higher current power supply. See 

Specifications

Specifications

Specifications

Specifications

 on page 21 for power supply details. 

 

Do not remove any cabinetry other than the areas specified in this guide; removing cabinetry other 
than the areas specified in this guide will void the warranty. 

Recommendations

 

 

This unit may be installed and programmed by a distributor (reseller) other than the original 
manufacturer.  Record all distributor contact information for future reference. 

 

Save the original box and packing material. Re-use them if the unit must be shipped to a new location. 

 

Position the unit so that the operator has easy access to the check path and a clear view of the LED. 
Do not put the unit close to a heat source, in direct sunlight, or close to any device that can emit 
electromagnetic interference such as a computer monitor or power adapter. Do not use the unit near 
water, including a sink, swimming pool, or damp basement. 

Содержание UEC 6000 Series





























Отзывы: