12
F. Connect the Power Cord
1. Insert the round end of the power cord into the “power” port on the back of the scanner.
2. Align the flat side of the power connector facing up.
3. Plug the metal-pronged end of the power cord into an electrical power outlet.
4. When you connect to power, the LED will light up. Your unit is now turned on.
CAUTION:
Disconnecting the power source while the terminal is processing a transaction may cause
data files stored in the unit’s memory to be lost.
NOTE:
The UEC 6000 and UEC 7000 power adaptor contains a locking mechanism that securely
connects the power cord to the scanner. To prevent cord damage, do not pull on the cord. Firmly slide
back the locking mechanism before disconnecting the power cord from the unit.