Installation of the Transmitter
The following are the two different ways to connect the TV Listener K4. Your installation
will depend on the type of equipment you have.
1.
STEREO INSTALLATION
– for equipment with two audio output jacks (stereo televi-
sions, DVD players, cable boxes). Refer to Pg. 6.
2.
SMALL HEADPHONE JACK INSTALLATION
– for equipment with a small headphone
jack (most CD players, portable stereos, MP3 players). Refer to Pg. 7.
How It Works
The TV Listener K4 works just like your remote control, sending an invisible infrared
signal from your television or any other audio device to the headset. Unlike radio fre-
quency devices, infrared is not subject to interference from cordless phones, wireless
networks, microwaves, etc. You adjust the volume on the wireless, lightweight headset
to suit your personal needs. Multiple headsets can be used with one transmitter.
Setting Up the System
Charge the batteries in the headset for 8 hours prior to first use.
TV Listener K4 Components
Check that you have all the following components before installation.
RCA 3.5mm stereo adapter
AC adapter
{
4
}
{
5
}
Transmitter
(connects to your TV or other audio device)
Wireless Headset
2 AAA rechargeable batteries
Infrared Rays
Headphone
Adapter
AC Adapter Jack
Infrared
Sensors
Battery
Compartment
Power
Indicator
Light
Power
Switch
Left
Volume
Control
Charging
Indicator Light
Charging
Base
Front
Front
Right
Volume
Control
Ear Pieces
Back
Back
AAA battery
AAA battery
