27
ADJUSTING THE TOP BURNER AND OVEN FLAME
Keep appliance area clear and free from combustible materials, gaso-
line, and other flammable vapors and liquids. Do not obstruct the flow
of air that is necessary for combustion and ventilation.
Top Burner Valves
The top burners have orifices that are dedicated to the type of fuel to be used.
These orifices are not adjustable. They must be changed completely to convert
from one gas to the other. DO NOT DISCARD THE UNUSED ORIFICES. They
should be saved in order to convert the range back to its original fuel.
When converting the gas valves, the minimum flame adjustment screw must be
adjusted.
Please see the supplied screwdriver in the conversion kit along with the orifices.
The proper flame size is approximately ¼” obtained. – see adjustment procedure
below.
The properly adjusted maximum flame is approximately 3/4” high and has three
distinct cones; the kindling point, the dark blue center cone, and the outer mantel.
ADJUSTING THE TOP BURNER FLAME
1. Ensure the range has gas supply and power
2. Light the burner
3. Set the top burner valve to the minimum position
4. Remove the knob by pulling straight out
5. Locate the bypass screw behind the
left screw (see illustration)
Remove the left screw
Insert the flat head screwdriver
(2.5mm x 75mm - provided) into
the screw hole and turn the by
pass screw clockwise to adjust the flame
Do not overtighten
6. Replace the knob
7. Repeat for each of the other burners
Содержание Prestige UGP-24V PC1 B
