Unique elite UGP-36E6 ON1, Руководство пользователя

Страница: 17 / 47

17
1. The power cord is equipped with a three-prong (grounding) plug which
mates with a standard three-prong grounding wall receptacle to minimize
the possibility of electrical shock hazard from the range.
2. All cord connected appliances shall include instructions relative to location
of the wall receptacle and a warning to the user to disconnect the electrical
supply before serving the appliance.
3. Where a standard two-prong wall receptacle is encountered, it is the
responsibility and obligation of the customer to have it replaced with a
properly grounded three-prong wall receptacle. Do not cut or remove the
grounding prong from the power cord.
Label all wires prior to disconnection when servicing
controls. Wiring errors can cause improper and
dangerous operation. Verify proper operation after
servicing.
CONNECTING RANGE TO GAS SUPPLY
1. Install a manual gas line shut-off valve in the gas line in an easily accessed
location outside the range, in the gas piping external to the appliance for
the purpose of turning on or shutting off gas to the appliance.
2. Install a male 1/2” flare union adapter to the 1/2” NPT internal thread elbow
at the inlet of regulator. On models equipped with standard twin burners,
install the male pipe thread end of the 1/2” flare union adapter to the 1/2”
NPT internal thread at inlet of pressure regulator. Use a wrench on the
regulator fitting to avoid damage.
3. Install a male 1/2” or 3/4” flare union adapter to the NPT internal thread of
the manual shut-off valve, taking care to secure the shut-off valve to keep
it from turning.
4. The gas supply pressure for checking the regulator setting is 5 in.w.c.
(Natural Gas) and 13 inch.w.c. (LP gas) connect flexible gas line connector
to the regulator on the range. Position range to permit connection at the
shut-off valve.
5. When all connections have been made, make sure all range controls are in
position and turn on main the gas supply valve.
ELECTRICAL GROUNDING
!
CAUTION