Unique Gas Products UGP-30E CT2, Руководство пользователя

Страница: 21 / 34

U G P - 3 0 E – C T 2
17
Operating the Surface Burners
Control Panel Legend
Off Off
High Flame/Ignition
Burner Position ●
Lighting the burners
1. To obtain a flame more easily, light the burner before placing a cooking
utensil on the burner grate.
2. Decide which burner you’re igniting first using the screened diagram below
the burner knob, the black dot indicates the position of the burner you’re
igniting.
3. To light a burner, press the burner knob in and turn counter clockwise to
high flame/ignition position. You will hear the electronic ignition clicking as
you continue to hold the knob down until the flame lights. Once the burner
is lit, hold in for a few extra seconds to warm up the thermocouple so the
electromagnet in the burner valve stays in the open position once you release.
4. After lighting the flame, turn the control knob to adjust the flame size as
required.
5. In the instance of a power outage when using the 110V electronic ignition
option, one can still use the rangetop by placing a lit match next to the
desired burner and proceed as already described. If using the battery ignition,
check that your batteries have adequate voltage by replacing them. If the
burner still does not light after a few attempts, check that the “burner cap”
and “flame cap” are correctly positioned and that there are no spider webs in
the burner cavity.