Unipro UniStop V2, Руководство пользователя

Страница: 21 / 28

21
MULTISTART SETUP
UniStop can start the stop watches in two
ways.
Set the way watches starts. One at a time,
or all at once.
When Multistart is off, you start each stop
watch one at a time.
When Multistart is on, you will always start
all four stop watches at once. If you want less
drivers, you can always use the “REMOVE
DRIVER” from the popup menu to remove one.
COLOR FEEDBACK SETUP
UniStop will compare the lap and split times to
the best and will show if it is the same, better
or worse with the color of the backlight.
Set if better/worse light should be shown
for lap and split times.
If you do not want this, or if you want to save
batteries, you can uncheck the checkbox to
turn this function off.
BIG FONT SETUP
UniStop will use a quite small font for 3 and
4 drivers. It can be hard to read, so we added
the possibility to use a much bigger font, but
with less information.
Set if a big font should be used for 3 or 4
drivers screen.
If you do want this bigger font, you can check
the checkbox. Please notice, that it will affect
both 3 and 4 drivers, and both stop watch and
analyze mode.
NORMAL SPLITS SETUP
UniStop can show split times in two different
ways. The normal way is split times as the time
difference between the split points.
Set if splits should be shown as normal.
If you do not want this, you can uncheck the
checkbox to use summed split times instead.
Summed split do accumulate the split times.
With summed splits, “Split L” is not available.
Setup mode
R e f e r e n c e
G u i d e