Unipro UniStop V2, Руководство пользователя, Страница: 20 / 28

20
R e f e r e n c e
G u i d e
Setup mode
press OK again to go back to the setup menu.
LANGUAGE SETUP
UniStop is able to support a lot of different
languages and you are able to select them
from the setup menu.
Language setup.
To do that, move to LANGUAGE and press OK .
You will then be able to change the language
with the up and down buttons.
As soon you press the
OK button again,
UniStop will be changed to use the other
language. The name of the language is always
the same two letters. That way you can always
recognize your own language!
BACKLIGHT SETUP
UniStop can be used in dark conditions. Tur-
ning on the backlight will however use a lot of
battery power.
Turn the backlight on and off, and set the
brightness value
.
The backlight can be adjusted between 10%
and 100%. The backlight is not turned on and
off with this setting. Please see “BACKLIGHT”
on page 12.
Even though UniStop uses RGB backlight, we
mix the three to get the backlight as white as
possible. You will not be able to adjust the
color. The colored backlight is only used for
the better/worse indication.
To increase the battery lifetime, please
set the backlight as low as possible!
AUTO POWER-DOWN SETUP
UniStop will automatically turn itself off if it is
not used.
Set the time before UniStop turns off auto-
matically.
To save batteries, you want it to turn off as fast
as possible, but on the other hand it should
not affect the daily work.
You can adjust the auto power-off time
between 1 and 30 minutes by selecting “OFF
TIME:” and press
OK . Then use the up and
down buttons to adjust the setting. When the
time is what you want, press
OK again to go
back to the setup menu.
UniStop does not power-down if any of
the stop watches are running.