Unipro 17-01-001 UniTire, Руководство пользователя

Страница: 35 / 36

7
press on the right button ( ) will bring you to
the first page again.
If you want to clear the memory, press and
hold the
left button ( 3 ).
To go back to sequence mode, press the left
button ( ) again.
Asphalt temperature is stored too
To see the asphalt temperature measured at
the start of each sequence, just press a little
longer on the
right button (
1
). This will
toggle between asphalt temperature and tire
temperature.
The recall screen will show the asphalt
temperature for each sequence.
Navigation when viewing asphalt temperatures
is the same as when viewing tire temperatures.
SETUP MODE
You enter Setup mode by pressing both the
left and right buttons at the same time
(
3
+
3
).
You can also do this to go directly to Setup
mode when turning UniTire on.
GENERAL FUNCTIONS
In setup mode you use the left button ( ) to
scroll through choices, and to change or adjust
the current setting.
Use the right button ( ) to accept a value and
store it in the memory and move on to the next
setup screen.
When you are finished with the setup, you can
return to the previous mode by pressing and
holding both the
left and the right buttons
(
3
+
3
) or turning UniTire off by pressing
and holding the
right
button ( 3 ).
All settings are stored and will not be cleared,
even if you remove the batteries.
TEMPERATURE UNIT SETUP
UniTire can be set to show the temperature in
either degree Celsius or degree Fahrenheit.
The “SET TEMP. UNIT“ gives you the choice
between Celsius and Fahrenheit.
Scroll between choices by pressing the left
button ( ). Select and move to next setup
screen by pressing the
right button ( ).
Operating UniTire
R e f e r e n c e
G u i d e