Unipro 17-01-001 UniTire, Руководство пользователя

Страница: 19 / 36

19
R e f e r e n c e
G u i d e
Setup mode
choice between Digital and Analog view.
Scroll between choices by
pressing the
left button
( ). Select and move to next setup screen by
pressing the
right
button ( ).
MAX RANGE SETUP
If UniTire is set to operate in analog mode, it is
necessary to set the maximum pressure value
used on the scale.
You want to have the maximum range value as
low as possible to make the scale as detailed
as possible. That way you will get a better
resolution between the lines and it will be
easier to adjust the pressure using the analog
scale.
UniTire can measure pressure values up to 5
bar even if the max range is set to a lower
value.
Scroll between choices by pressing the left
button ( ). Select and move to next setup
screen by pressing the
right button ( ).
STEALTH MODE SETUP
This is where you choose if you want to use the
Stealth mode when measuring and storing tire
pressure in Sequence mode - the mode where
the pressure values are hidden.
Set Stealth mode to On if you want to use this
mode.
Scroll between choices by pressing the
left
button ( ). Select and move to next setup
screen by pressing the
right button ( ).
STEALTH TARGET SETUP
When stealth mode is enabled, 2 or 4 more
screens are shown - depending on the chosen
sport.
This is the hidden target pressure value for
each tire.
Increase the target value by pressing the
left button ( ). If you keep pressing the left
button (
3
), the increase of the value will go
faster.
To change between increasing and decreasing,
just press the
left button a little longer ( 1 ).
The direction is indicated by the small arrow.
To start from zero, press the right button a
little longer (
1
).
Select and move to next setup screen by press-
ing the
right button ( ).