Unipro 17-01-001 UniTire, Руководство пользователя

Страница: 17 / 36

17
RECALL MODE
The recall mode is where you view the tire
pressure values you have saved in Sequence
mode / Stealth mode.
You can store up to 20 sequences with either
2 or 4 tire pressure values in each sequence
(depending on the chosen sport).
To enter recall mode, press the left but-
ton ( ) from either sequence mode or
stealth mode.
The recall screen will show either two
or four tires, listed in the sequence you
selected in setup. In this example you see
page 1 of 2.
The first line will always show the new-
est saved values!
When you measure more than 20 sets of tires,
the oldest one will be erased and the new one
will be stored.
Each page in Recall mode can show four
different sequences with either 2 or 4 tires in
each.
In the bottom right corner you can see which
page you are on, and how many pages there
are in total. This example is showing page
1 out of a total of 2 pages. The maximum
number of pages is 5.
The pressure values are using the unit selected
in setup mode. The unit is shown in square
brackets at the bottom of the screen.
Navigating the pages is easy
To go to the next page just press the right
button ( ). When you reach the last page, a
press on the
right button ( ) will bring you to
the first page again.
If you want to go back to the first page before
you reach the last page, you can press a little
longer on the
right button (
1
).
If you want to clear the memory, press and
hold the
left button (
3
).
To go back to either sequence mode or stealth
mode, press the
left
button ( ) again.
Operation UniTire
R e f e r e n c e
G u i d e